- #TURN ON HDR PS4 FULL#
- #TURN ON HDR PS4 PRO#
Newest IBIS - If you purchased the Black version of the IBIS from Amazon, there is a chance you got the old version which did not fully support HDR. Latest Firmware - It is also good to always have the latest firmware updates on both your TV and the PS4 Pro. Some tv's have trouble renegotiating the HDCP handshake when switching back from the PSVR to HDR. Pre-switch - Make sure BEFORE you turn on the PS4 to switch the IBIS to the port you need. On some TV's you even have to go into the TV settings to enable HDR on the HDMI ports. A lot of TV's only have one HDR port and the rest are non-hdr. Make sure the cable going to the TV is plugged into an HDR enabled port. Enable HDR on your TV - This next one is silly but I have to get it out of the way. #TURN ON HDR PS4 PRO#
(NOTE: HDMI 2.0 only supports + 10 bit HDR if using 4:2:0, aka "YUV 420" on the PS4 Pro, that's why the PS4 Pro will automatically switch to YUV420 when it detects an HDR game and will not work if using the "RGB" option because using RGB 4:4:4 and HDR would exceed the 18Gbps limit of HDMI 2.0 ) Some users had better results manually setting the PS4 Pro to broadcast in "YUV420" while others had better results leaving it in "Auto".
Use YUV420 - If the cable is not the issue, you can check what type of signal is being sent from the PS4. Since the IBIS is a "passive" switch (it does not use a power adapter) you might get signal loss if the cable does not have enough bandwidth when trying to push that much information over long distances. (For our video we used 3ft long Premium HDMI cables on each end). 
This was easily fixed by using Premium HDMI 2.0 cables, or shorter HDMI 2.0 cables.
#TURN ON HDR PS4 FULL#
Use HDMI 2.0 cables - Most of the time the problem was they were either budget HDMI cables that did not meet the full HDMI 2.0 specs/bandwidth requirements to run 4K HDR, or the cable runs were too long.Here's a few tips I've gathered from all the YouTube comments and what has worked for other users. The errors varied from signal flickering to no signal at all.
We've had some users experience mixed results with this setup.
0 kommentar(er)
